Bazel build system

Drake’s primary build system is Bazel. For more information about Bazel, see https://bazel.build/.

Drake also offers a CMake build system wrapper that invokes Bazel under the hood.

Bazel Installation

Follow Drake’s platform-specific setup instructions to install bazelisk at /usr/bin/bazel, which will then automatically download the correct version of Bazel necessary for the build.

Drake clone and platform setup

  • Start with a git clone of drake, per the Getting Drake instructions.
  • Continue with the “Mandatory platform-specific instructions” on the same page.

Developing Drake using Bazel

To build or test Drake, run bazel build or bazel test with the desired target label (and optional configuration options if desired). We give some typical examples below; for more reading about target patterns, see: https://docs.bazel.build/versions/main/user-manual.html#target-patterns.

On Ubuntu, the default compiler is the first gcc compiler in the PATH. On macOS, the default compiler is the Apple LLVM compiler. To use Clang on Ubuntu, add --config=clang after any bazel build, bazel test or any other bazel commands.

Cheat sheet for operating on the entire project:

cd /path/to/drake
bazel build //...                 # Build the entire project.
bazel test //...                  # Build and test the entire project.

bazel build --config=clang //...  # Build using Clang on Ubuntu.
bazel test --config=clang //...   # Build and test using Clang on Ubuntu.
  • The “//” means “starting from the root of the project”.
  • The “...” means “everything including the subdirectories’ BUILD files”.
    • Contrast with, e.g., the “bazel build common:*” explained below, where only targets declared directly in drake/common/BUILD are compiled, and not the targets in drake/common/trajectories/BUILD. The “*” matches targets in that directory; the “...” also matches down into subdirectories.

You may use relative pathnames if your shell’s working directory is not at the project root:

cd /path/to/drake/common
bazel build ...                   # Build everything in common and its child subdirectories.
bazel test ...                    # Test everything in common and its child subdirectories.
bazel build //...                 # Build the entire project.
bazel test //...                  # Build and test the entire project.
  • As before, the “...” above means “everything including subdirectories”.
    • In the first two lines we did not precede “...” with “//”, so the search begins in the current directory (common) and not from the drake root.
    • In the second two lines we used the “//” prefix to specify the project root, so we’re back to operating on the entire project even though common is still our shell’s current working directory.

Cheat sheet for operating on specific portions of the project:

cd /path/to/drake
bazel build common/...                               # Build everything in common and its child subdirectories.
bazel build common                                   # Build libcommon.
bazel build common:polynomial                        # Build libpolynomial.
bazel build common:*                                 # Build everything in common but NOT its children.

bazel test common:polynomial_test                    # Run one test.
bazel test -c dbg common:polynomial_test             # Run one test in debug mode.
bazel test --config=memcheck common:polynomial_test  # Run one test under memcheck (valgrind).
bazel test --config=fastmemcheck common:*            # Run common's tests under memcheck, with minimal recompiling.
bazel test --config=kcov common:polynomial_test      # Run one test under kcov (see instructions below).
bazel build -c dbg common:polynomial_test && \
  gdb bazel-bin/common/polynomial_test               # Run one test under gdb.

bazel test -c dbg --config=clang --config=asan common:polynomial_test  # Run one test under AddressSanitizer.

bazel test --config lint //...                       # Only run style checks; don't build or test anything else.
  • The “:” syntax separates target names from the directory path of the BUILD file they appear in. In this case, for example, drake/common/BUILD specifies cc_test(name = "polynomial_test").
  • Note that the configuration switches (-c and --config) influence the entire command. For example, running a test in dbg mode means that its prerequisite libraries are also compiled and linked in dbg mode.
  • For the definitions of the “--config” options see drake/tools/bazel.rc.

Running with Flags

Example programs

In general, to figure out what binary-specific arguments are available, add “-- --help” to your bazel run command. An an example,

bazel run //examples/acrobot:run_passive -- --help

The bare -- separates Bazel arguments from the program’s arguments.

Unit tests

For running tests, you may pass custom arguments to the test program via –test_arg.

For a C++ unittest that uses drake_cc_googletest, for example:

bazel test multibody/plant:multibody_plant_test --test_output=streamed --nocache_test_results --test_arg=--gtest_filter='*SimpleModelCreation*'

For a Python unittest that uses drake_py_unittest, for example:

bazel test bindings/pydrake:py/symbolic_test --test_output=streamed --nocache_test_results --test_arg=--trace=user --test_arg=TestSymbolicVariable

Updating BUILD files

Please use the “buildifier” tool to format edits to BUILD files (in the same spirit as clang-format formatting C++ code):

cd /path/to/drake
bazel-bin/tools/lint/buildifier --all         # Reformat all Bazel files.
bazel-bin/tools/lint/buildifier common/BUILD  # Only reformat one file.

In most cases the bazel-bin/tools/lint/buildifier will already be compiled by the time you need it. In case it’s absent, you can compile it via:

cd /path/to/drake
bazel build //tools/lint:buildifier

Proprietary Solvers

The Drake Bazel build currently supports the following proprietary solvers:

  • Gurobi 10.0
  • MOSEK™ 10.0
  • SNOPT 7.4

Gurobi 10.0

Install on Ubuntu

  1. Register for an account on https://www.gurobi.com.
  2. Set up your Gurobi license file in accordance with Gurobi documentation.
  3. export GRB_LICENSE_FILE=/path/to/gurobi.lic.
  4. Download gurobi10.0.2_linux64.tar.gz. You may need to manually edit the URL to get the correct version.
  5. Unzip it. We suggest that you use /opt/gurobi1002 to simplify working with Drake installations.
  6. If you unzipped into a location other than /opt/gurobi1002, then call export GUROBI_HOME=GUROBI_UNZIP_PATH/linux64 to set the path you used, where in GUROBI_HOME folder you can find bin folder.

Drake supports any patch version of Gurobi 10.0. At time of writing, the most recent available version was 10.0.2; if using a newer patch version, the paths and file names above should be adjusted accordingly.

Install on macOS

  1. Register for an account on http://www.gurobi.com.
  2. Set up your Gurobi license file in accordance with Gurobi documentation.
  3. export GRB_LICENSE_FILE=/path/to/gurobi.lic
  4. Download and install gurobi10.0.2_mac64.pkg.

To confirm that your setup was successful, run the tests that require Gurobi:

bazel test --config gurobi --test_tag_filters=gurobi //...

The default value of --test_tag_filters in Drake’s bazel.rc excludes these tests. If you will be developing with Gurobi regularly, you may wish to specify a more convenient --test_tag_filters in a local .bazelrc. See https://docs.bazel.build/versions/main/user-manual.html#bazelrc.

MOSEK

The Drake Bazel build system downloads MOSEK™ 10.0.18 automatically. No manual installation is required. Set the location of your license file as follows:

export MOSEKLM_LICENSE_FILE=/path/to/mosek.lic

To confirm that your setup was successful, run the tests that require MOSEK™:

bazel test --config mosek --test_tag_filters=mosek //...

The default value of --test_tag_filters in Drake’s bazel.rc excludes these tests. If you will be developing with MOSEK™ regularly, you may wish to specify a more convenient --test_tag_filters in a local .bazelrc. See https://docs.bazel.build/versions/main/user-manual.html#bazelrc.

SNOPT

Drake provides two mechanisms to include the SNOPT sources. One mechanism is to provide your own SNOPT source archive. The other mechanism is via access to a private RobotLocomotion git repository.

Using your own source archive

  1. Download the SNOPT sources from the distributor in .tar.gz format (e.g., named snopt7.4.tar.gz).
  2. export SNOPT_PATH=/home/username/Downloads/snopt7.4.tar.gz

Using the RobotLocomotion git repository

  1. Obtain access to the private RobotLocomotion/snopt GitHub repository.
  2. Set up SSH access to github.com.
  3. export SNOPT_PATH=git

Test the build (for either mechanism)

To confirm that your setup was successful, run the tests that require SNOPT:

bazel test --config snopt --test_tag_filters=snopt //...

The default value of --test_tag_filters in Drake’s bazel.rc excludes these tests. If you will be developing with SNOPT regularly, you may wish to specify a more convenient --test_tag_filters in a local .bazelrc. See https://docs.bazel.build/versions/main/user-manual.html#bazelrc.

SNOPT support has some known problems on certain programs (see drake issue #10422 for a summary).

Other optional dependencies

OpenMP

Drake is in the process of adding support for multiprocessing using OpenMP. At the moment, that support is experimental and is not recommended for Drake’s users.

For Drake Developers who wish to enable OpenMP, use this config switch:

bazel test --config omp //...

This switch is enabled in CI under the “Ubuntu Everything” build flavor.

Optional Tools

The Drake Bazel build system has integration support for some optional development tools:

  • kcov – test coverage analysis

kcov

kcov can analyze coverage for any binary that contains DWARF format debugging symbols, and produce nicely formatted browse-able coverage reports.

Drake’s kcov build system integration is only supported on Ubuntu, not macOS.

In some cases, running kcov builds and regular builds from the same source tree will lead to Bazel error messages like “this rule is missing dependency declarations”. To resolve that problem, either run the kcov build from a fresh checkout, or else run a bazel clean.

To analyze test coverage, run one (or more) tests under kcov:

bazel test --config=kcov common:polynomial_test

Note that it disables compiler-optimization (-O0) to have a better and more precise coverage report. If you have trouble with kcov and unoptimized programs, you can turn it back on by also supplying --copt -O2.

For each test program, individual coverage reports are written to per-target directories. Use the kcov_tool to merge coverage data into a new directory:

tools/dynamic_analysis/kcov_tool merge [OUTPUT-DIR]

To view the merged data, browse to index.html in the OUTPUT-DIR.

In a local developer workspace, coverage data may accumulate over successive build jobs, even if source files or other dependencies have changed. The stale data would be scattered within the directory tree linked as bazel-testlogs. To clear out old data, use kcov_tool clean:

tools/dynamic_analysis/kcov_tool clean

kcov and Python

Coverage reports for Python sources produced by kcov are useful, but can be misleading. As of Ubuntu 22.04 and kcov 38, Python reports do not render coverage for multi-line statements properly. Statements that use delimiter pairs to span more than two lines, or statements that use string token pasting across multiple lines may be mistakenly shown as only partially executed.

Drake bazel rules and kcov

Some Drake-specific bazel rules (e.g. drake_cc_google_test) use various heuristics to skip certain tests in kcov builds. This may hinder developers trying to use kcov locally on specific tests. For example:

bazel test --config=kcov //common:temp_directory_test

results in:

ERROR: No test targets were found, yet testing was requested

To force execution with kcov, add an empty test_tag_filters option:

bazel test --config=kcov --test_tag_filters= //common:temp_directory_test